[KERNEL] [JB 4.3][CWM/TWRP/SwitchSD]Mackay kernel 0.599 (07-Dec-2013)

ATTENZIONE NE IO NE IL FORUM CI RITENIAMO RESPONSABILI PER EVENTUALI DANNI ARRECATI AL TELEFONO
CHI ESEGUE QUESTA PROCEDURA LO FA A PROPRIO RISCHIO E PERICOLO

Mackay kernel

​

Attenzione: questa versione è compatibile solo con android 4.3 !!

Caratteristiche

-Build using the Cortax-A8 optimized Linaro 4.7.4 toolchain of Christopher83:
-Christopher86's cortex-A8 optimized Linaro toolchain (July version)
-O3 optimization
-updated to linux kernel version 3.0.91
-SLQB memory allocator (default, should be slightly faster)
-XZ compression of kernel & initramfs
-395MB RAM
-SIO scheduler
-Added Lagfree governor
-ROW scheduler (tweaked, default scheduler)
-FIOPS scheduler (tweaked)
-XZ compression of kernel & initramfs
-395MB RAM
-many improvements to IO schedulers in general
-Deadline tuning (thanks to DerTeufel)
-Ondemand tuned (default governor)
-SmartassV2 governor
-Interactive governor (updated to android 3.4 code + fixes)
-Wheatley & Lulzactive governors
-Conservative tuned
-Call volume hack (use “Settings>Mackay Settings”* to set volumes)
-Reduced battery polling interval
-Fast charge (activate through “Settings>Advanced Settings”* or the QuickCharge toggle in MackayROM)
-WiFi PM_FAST mode selection (activate using “Settings>Mackay Settings”*)
-Battery life extender (set through “Settings>Mackay Settings”*)
-CustomVoltage (set using NSTools)
-BLN (can be enabled through “Settings>Mackay Settings”*)
-USB OTG support (needs external power supply)
-1100-1400MHz OC steps
-Custom kernel splash (Thanks to Malcho)
-Updated charging logo to match open charger
-Disabled swap & zram
-Improve memcopy/memmove
-Improve the performance of memcpy and memmove
-Kill task closest in size to memory needed to free
-LOAD_FREQ (4*HZ+61) avoids loadavg Moire
-Entropy tweaks:
-backport CPUIDLE from 3.5
-arm/crypto: Add optimized AES and SHA1 routines
-Unaligned CPU access
-Updates to binder
-Improvements to RWSEM code
-Improvements to binder code
-Improvements to tmpfs
-Added frandom (much faster random number generator)
-Updated to lowmemorykiller with PID whitelist (thanks to stratosk)
-Updated wifi driver to 5.90.195.114
-Updated GPU driver to DDK 1.8@2198402

Recovery

-Mackay recovery (based on CWM 6.0.3.5 & TWRP 2.6.3.0)

CWM

-Clear NSTools settings
-Clear init.d settings
-Show battery status in recovery
-Aroma FileManager
-Include using soft keys to navigate the menu (thanks fishears for the idea)
-Enable holding keys for repeated presses
-Themed orange

T.W.R.P.

-Themed orange
-Run recovery-apps (zip files should be present in /system/mackay, launch them through advanced->run app)
-Build in a script to reboot from twrp to cwm*


Download

Download ultime verisioni

Installazione


1. Scaricare file in formato zip
2. Inserire il file precedentemente scaricato sulla scheda sd
3. Avviare in recovery (Tasto accensione + tasto centrale + tasto volume su)
4. Selezionare "Install zip" e selezionate il file zippato
5. Riavviate !!


Fonte: Xda

 

Changelog

Changelog 0.516
-Updated to v3.0.101
-Updated ramdisk for CM10.2 builds after 22-Oct (otherwise resulting in phone FC)
-Updated ondemand code to the code by stratosk
-Updated TWRP code

Vecchie versioni

Spoiler

Changelog 0.514
-Updated to v3.0.100

Changelog 0.513
-Both CWM (updated to 6.0.4.4) and TWRP
-Replaced SIO by SIOPLUS
-Added OndemandX

Changelog 0.511
-Added zRAM with a large number of patches (Thanks to DerTeufel!)
-Updated to linux v3.0.99
Changelog 0.509
-Updated to Linux v3.0.98
-Some small code updates to TWRP

Changelog 0.508
-Kernel source code identical to 0.507
-Three flavours:
-CWM (updated CWM to 6.0.4.0)
-CWM / TWRP with swapped SD card mount points.
Downloads can be found in the respective subfolders of the download-link (should be quite clear from folder & file name what you are downloading)
Changelog 0.505 compared to previous release (0.416)
-Only TWRP recovery, updated TWRP to 6.2.3.0
-Updated to linux kernel version 3.0.97

Changelog 0.416 compared to previous release (0.415)
-Several updates to interactive governor
-Updated Aroma FM included in the kernel

Changelog 0.415 compared to previous release (0.414)
-Updated to linux v3.0.96
-Build with September release of toolchain

Changelog 0.413 compared to previous release (0.502)
-Rebuild RAMdisks for SELinux
-Updated to linux v3.0.94
-Back to a combined CWM & TWRP
-Fixed soft-key navigation in CWM
-Reverted some TCP/IP patch that caused an issue with certain WiFi connections.
-Latest CWM which was present in 0.502 will backup by default in .tar.gz format. Smaller, but restoring is not supported on older CWM kernels like 0.413. So please make a fresh backup (either in TWRP or CWM) after flashing the 0.413, but only after reboot recovery, because after flashing 0.413 you are still in the new CWM
recovery of the 0.502 kernel

Changelog 0.502 compared to previous release (0.407)
-Rebuild RAMdisks for SELinux
-Updated to linux v3.0.93
-ONLY CWM -> No more TWRP
-Latest CWM will backup by default in .tar.gz format. Smaller, but restoring is not supported on older CWM kernels. Default backup format can be chosen by the user in CWM.
-Proportional Rate Reduction for TCP
-Introduce timer slack controller


Changelog 0.407 compared to previous release (0.406)
-Rebuild RAMdisks for SELinux
-Updated to linux v3.0.91
-Added latest Bluetooth patch

Mackay settings:

*“Settings>Mackay Settings” only available with Mackay ROM 3.x.x (to be released soon)
*also available through the Galaxy S & Mackay app in the launcher

On other roms, install the kernel, reboot, open /data/local/mackay/bln/recovery/navbar and change the 0 for 1. Then reboot:
bln (set to 1) BLN will be activated
chosenrecovery (set to 1) CWM will be activated
navbar (set to 1) navbar will be activated
As an alternative, Bejda developed a script for Mackay settings:
http://forum.xda-developers.com/show...&postcount=953

 

ottimo kernel, con supporto all'overclock fino a 1400, ed inoltre ha la twrp completamente touch e funzionate !!

 

uscita la 0.502, per il momento con recovery cwm, in attesa che il tema twrp rilasci i sorgenti per android 4.3

 

uscita la 4.1.3 ed è stata reintrodotta la twrp

 

uscita la v 0.415

 

uscita la v 0.416

 

uscita la 0.505

 

uscita la 0.509

 

uscita la 0.513

 

uscita la 0.514

 

scusate. va bene per l's4?
inoltre quali sono le differenze tra ....CMC-signed.zip e ...cwm_VC-signed.zip

 

assolutamente no

 

uscita la v 0.516

 

Perdonami ma per la cyanogenmod 11 non va bene questa? rootaxbox.no-ip.org - /kasper_h/kernels/KK/

 

Si va bene, qui pero siamo nel thread della vecchia versione

Inviato dal mio GT-N5110 utilizzando Tapatalk

 

esiste un thread della nuova versione? oppure potresti linkarmi dove scaricare a parte quello già postato da me?

 

te l'ho linkato nel thread dello script