[RECOVERY] [HTC One M9] TWRP 3.1.0.0 Touch Recovery

ATTENZIONE  

IMPORTANTE: NE IO NE IL FORUM CI RITENIAMO RESPONSABILI PER EVENTUALI DANNI ARRECATI AL TELEFONO A SEGUITO DELL'APPLICAZIONE DELLE PROCEDURE CHE SEGUONO. SE APPLICATE, E' A PROPRIO RISCHIO E PERICOLO

"La TWRP è una delle migliori recovery custom e viene utilizzata da un sempre maggior numero di utenti. Merito del suo successo va anche al costante supporto da parte degli sviluppatori, che ne pubblicano sempre nuove versioni - FONTE. Grazie ad uno sviluppatore, che ha pubblicato un’applicazione su Xda developers, è possibile installare la recovery modificata TWRP senza particolari problemi. L’applicazione si chiama TWRP Installer e non fa altro che scaricare l’ultima versione disponibile dell’omonima recovery per il nostro terminale. [...] scaricare sul vostro telefono quest’applicazione ed eseguirla, dando ovviamente i permessi di root. Per installare la recovery vi basterà semplicemente un tap su “Install TWRP” e seguire eventuali altre istruzioni a schermo (FONTE)

ULTIMA VERSIONE DISPONIBILE PER HTC ONE M9: TWRP 3.1.0-0 hima​

CHANGELOG 3.1.0-0:

• vold decrypt on a few select HTC devices, TWRP will now attempt to use the system partition's vold and vdc binaries and libraries to decrypt the data partition (nkk71 and CaptainThrowback)
• adb backup to stream a backup directly to or from your PC, see documentation here (bigbiff)
• tweak MTP startup routines (mdmower)
• support new Android 7.x xattrs for backup and restore to fix loss of data after a restore (Dees_Troy)
• support POSIX file capabilities backup and restore to fix VoLTE on HTC devices and possibly other issues (Dees_Troy)
• better indicate to users that internal storage is not backed up (Dees_Troy)
• improve automatic determination of TW_THEME (mdmower)
• minimal getcap and setcap support (_that)
• try mounting both ext4 and f2fs during decrypt (jcadduono and Dees_Troy)
• shut off backlight with power key (mdmower)
• timeout during FDE decrypt (Dees_Troy and nkk71)
• support for FBE decrypt and backing up and restoring FBE policies (Dees_Troy)
• boot slot support (Dees_Troy)
• TWRP app install prompt during reboot (Dees_Troy)
• support for AB OTA zips (Dees_Troy)
• support new Android 7.x log command (Dees_Troy)
• update recovery sources to AOSP 7.1 (Dees_Troy)
• numerous bugfixes and improvements by too many people to mention

Vecchie Versioni:

Spoiler

CHANGELOG for 3.0.2-0:

• Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
• Add Greek translation to some builds.

CHANGELOG for 3.0.1-0:

• support new CM 13.0 pattern encryption (sultanqasim)
• fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
• libtar updated to latest upstream and fixes (jcadduono)
• fixes for loading custom themes (_that)
• TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
• translation updates - added Italian, Czech and Polish and significant updates to Dutch
• progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
• fix input box text display (Dees_Troy)
• reboot option after zip install complete (bigbiff)
• other mostly invisible bug fixes and improvements

CHANGELOG for 3.0.0.0:

- Completely new theme - Much more modern and much nicer looking (by z31s1g)
- True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
- Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
- Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
- Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
- Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
- SuperSU prompt will no longer display if a Marshmallow ROM is installed
- Update exfat, exfat fuse, dosfstools (by mdmower)
- Update AOSP base to 6.0
- A huge laundry list of other minor fixes and tweaks

CHANGELOG for 2.8.7.0:

- Initial ground work for software drawn keyboard (_that)
- Fix handling of wiping internal storage on datamedia devices (xuefer)
- Allow DataManager to set and read values from the system properties (xuefer)
- Fix crash when taking screenshots on arm64 devices
- Fix error message after an ORS script completes (Dees_Troy)
- Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
- Add system read only option – more details below (Dees_Troy)
- Add resize2fs and GUI option to run resize2fs (Dees_Troy)
- Fix crash loop caused by empty lines in AOSP recovery command file (_that)
- Prevent duplicate page overlays such as multiple lock screens (mdmower)

CHANGELOG for 2.8.6.0:

-Fix daylight savings time rules for USA and Europe (_that)
-Allow mulitple overlays for popup boxes (Dees_Troy)
-Add pattern style password entry for decrypt (Tassadar)
-Keyboard improvements (_that)
-Update AOSP base to 5.1 (Dees_Troy)
-Reduce theme count to 5 and rely on scaling (Dees_Troy)
-Various scaling improvements (Dees_Troy)
-Improved handling of resources in the GUI (_that)
-Make scroll bar size proportional to list size (_that)
-Allow scoll lists to render without a header (_that)
-Make console scroll per pixel with kinetic scrolling (_that)
-Support styles in XML to reduce XML size and improve consistentcy (Dees_Troy)
-Various other fixes and improvements (mdmower, bigbiff, codelover, etc)

CHANGELOG for 2.8.5.0:

-Scale the GUI - TWRP can read the theme's resolution and scale it up or down to fit the theme to your screen's resolution
-Backups can now be cancelled while the backup is in progress (does not include restore because we don't want to leave your device in a bad state)
-Improve thread handling and move input handling into the main rendering thread to improve stability
-Make MTP work even if unplugged and plugged back in
-Unify scrollable list code and make kinetic scrolling feel more natural
-Fix handling of mapped zip files for OTA updates (CM12 updater)
-USB keyboards should now work on all devices that support USB host mode via a USB OTG cable
-Other small fixes and improvements

CHANGELOG for 2.8.4.0:

-Add flashing of boot and recovery images via the TWRP GUI (Find the Images button on the Install page)
-Fix some MTP related crashes and bugs
-Eliminate TWRP toggling USB IDs during boot if MTP is enabled
-Fix various adb sideload issues
-Improve threading of actions
-Eliminate separate thread for screen timeout
-Update libblkid to 2.25.0
-Use power button as back button on watch themes for easier navigation
-Add mutex locking to data manager
-Improve custom theme handling on encrypted devices
-Allow the stock theme to be offset by build flags so we can center a lower res theme on a higher res screen especially for watches with round screens

CHANGELOG for 2.8.3.0:

-MTP will now tell the host PC that storage is removed instead of disabling MTP completely
-MTP will now report the correct max file size based on the file system in use to the host PC (may fix transfer of large files)
-Update and improve fix permissions and make fixing contexts optional
-Update SuperSU in TWRP to 2.40 and update install process
-Make TWRP work properly on AArch64 (Nexus 9 is now built in true 64-bit binaries and libraries)
-Attempt to set correct permissions and contexts on all files placed in storage so backups will show in Android
-Fix kernel panic during MTP start on some devices
-Support unicode fonts on devices with True Type Font support
-Fix slider value not showing sometimes (vibration settings page)
-Toggle MTP off during adb sideload to set correct USB IDs
-Reduce library requirements for 5.0 L decrypt
-Other minor fixes and improvements

Note: Starting with TWRP 2.8.2.0 and higher, adb sideload uses a new sideload method originally implemented in AOSP recovery. You will need the latest adb binaries to use sideload in these newer versions of TWRP. The version required is 1.0.32. You can find the version by running "adb version" on your computer. The new sideload feature no longer stores the zip on your device. Instead, a fuse file system is created in RAM and the zip is streamed from your computer. This puts less wear and tear on storage and ensures that large zips will not fill up all of your RAM. The sideload may spit an error on your PC side, but the zip should install just fine on your device.

CHANGELOG for 2.8.2.0:
-Pull in all changes from Android 5.0 lollipop into TWRP
-Add decrypt support for Android 5.0 lollipop encrypted partitions including automatic decrypt when the default_password is in use
-Revert some changes to exFAT that were breaking exFAT support on some devices
-Other minor fixes and updates

INSTALLAZIONE:

• Scaricare la TWRP dal link sopra e rinominarla semplicemente in twrp.img
• Copiate il file nella cartella ADB/FASTBOOT usata per la procedura di sblocco del Bootlaoder.
• Riavviate il dispositivo in "Download Mode"
• Digitate i seguenti comandi:

Code:

fastboot erase cache

poi successivamente

Code:

fastboot flash recovery twrp.img

Una volta terminata l'installazione potete procedere all'accesso alla recovery tramite il comando:

Code:

adb reboot recovery

PROCEDURA DI AGGIORNAMENTO DELLA RECOVERY (NEL CASO SI DISPONE DI UNA VERSIONE PRECEDENTE GIA INSTALLATA SUL DISPOSITIVO):
Dalla TWRP versione 2.8.4.0 in poi è possibile installare le successive releaes anche direttamente dalla TWRP Recovery nel seguente modo:

1. Download delll'ultima versione della TWRP appropriata per il vostro device/firmware
2. Reboot in TWRP
3. Scegliete "Installa" e poi "Installa Immagine" in basso a destra
4. Cercate il file TWRP image nel vostro dispositivo e selezionatelo
5. Infine Selezionate "Recovery" dalla lista di partizioni su cui installare e fate lo swipe per avviare il flash come da Immagine sotto
   Spoiler

   

DOWNLOAD:
Sito Ufficiale!

 

Update

CHANGELOG for 2.8.6.0:

-Fix daylight savings time rules for USA and Europe (_that)
-Allow mulitple overlays for popup boxes (Dees_Troy)
-Add pattern style password entry for decrypt (Tassadar)
-Keyboard improvements (_that)
-Update AOSP base to 5.1 (Dees_Troy)
-Reduce theme count to 5 and rely on scaling (Dees_Troy)
-Various scaling improvements (Dees_Troy)
-Improved handling of resources in the GUI (_that)
-Make scroll bar size proportional to list size (_that)
-Allow scoll lists to render without a header (_that)
-Make console scroll per pixel with kinetic scrolling (_that)
-Support styles in XML to reduce XML size and improve consistentcy (Dees_Troy)
-Various other fixes and improvements (mdmower, bigbiff, codelover, etc)

 

Update

CHANGELOG for 2.8.7.0:

• Initial ground work for software drawn keyboard (_that)
• Fix handling of wiping internal storage on datamedia devices (xuefer)
• Allow DataManager to set and read values from the system properties (xuefer)
• Fix crash when taking screenshots on arm64 devices
• Fix error message after an ORS script completes (Dees_Troy)
• Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
• Add system read only option – more details below (Dees_Troy)
• Add resize2fs and GUI option to run resize2fs (Dees_Troy)
• Fix crash loop caused by empty lines in AOSP recovery command file (_that)
• Prevent duplicate page overlays such as multiple lock screens (mdmower)

Update

CHANGELOG for 3.0.0.0:

• Completely new theme - Much more modern and much nicer looking (by z31s1g)
• True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
• Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
• Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
• Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
• Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
• SuperSU prompt will no longer display if a Marshmallow ROM is installed
• Update exfat, exfat fuse, dosfstools (by mdmower)
• Update AOSP base to 6.0
• A huge laundry list of other minor fixes and tweaks

 

Update

CHANGELOG for 3.0.1-0:

• support new CM 13.0 pattern encryption (sultanqasim)
• fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
• libtar updated to latest upstream and fixes (jcadduono)
• fixes for loading custom themes (_that)
• TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
• translation updates - added Italian, Czech and Polish and significant updates to Dutch
• progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
• fix input box text display (Dees_Troy)
• reboot option after zip install complete (bigbiff)
• other mostly invisible bug fixes and improvements

Update

CHANGELOG for 3.0.2-0:

• Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
• Add Greek translation to some builds.

 

THREAD AGGIORNATO!!​

 

Ciao a tutti, devo installare la VIper e ho notato che l'ultima versione TWRP è la 3.1.1.0. Questa è consigliata?

 

Solitamente l'ultima versione è sempre consigliata!!

Inviato dal mio HTC 10

 

Ciao a tutti, ho scaricato la twrp, l'ho inserita nella sd, ma non me la legge, non mi risulta in recovery, e se collego il device al pc è esistente. Come posso risolvere?

 

Se hai scaricato la recovery.img devi flasharla da fastboot col PC

 

Al momento hai la recovery stock?!? Se si devi usare FASTBOOT. Diversamente se hai già la TWRP installata non c'è bisogno di installarla tramite FASTBOOT. Avvia la recovery, vai su INSTALLA e in basso c'è una voce INSTALLA IMMAGINE, tappi li sopra e vedrai che riuscirai a vedere i file .img che sono memorizzati nella SD ESTERNA.
Selezioni quello da flashare e alla richiesta su quale partizione installare scegli RECOVERY.

 

Evidentemente sono rimasto indietro sulla twrp

 

Bè direi proprio di si!! Sarebbe ora che ricominci ad usarla almeno dai una rinfarinata!!!