[KERNEL] [JB 4.3/4.2/4.1][ICS][MIUI][CWM/ODIN][I9000/B] GearKernel (Universal/ICS 1.1.0)

ATTENZIONE NE IO NE IL FORUM CI RITENIAMO RESPONSABILI PER EVENTUALI DANNI ARRECATI AL TELEFONO
CHI ESEGUE QUESTA PROCEDURA LO FA A PROPRIO RISCHIO E PERICOLO




Info kernel:

Questo kernel è stato compilato da XDA_Alberto96 ed è basato sui sorgenti del semaphore kernel, con un po di aggiornamenti e ottimizzazioni,
Questo kernel si divide in tre gruppi con 2 versioni ognuno

JB3 per 4.3 Kernel
JBPlus per 4.2.2/4.2.1 Kernel
JB per 4.1.2/4.1.1 Kernel
ICS per 4.0.4/4.0.3 Kernel

Features ICS/Universal (updated for 1.1.0 Build)

Based on Semaphore Sources
Linux Kernel 3.0.101
Compile Flags Optimized
Compiled using Latest GCC 4.7.4 Cortex-A8 Optimized by Christopher83 (compiling one dedicated to GearKernel soon)
Updated GPU Driver and fixed some checks (not for ICS)
SLUB Memory Allocator
Disabled MMC Checksum Check
Load_freq(4*HZ+61) to avoid Loadavg Moire
Optimized lib/string and lib/memcopy
Optimized ARM RWSEM algorithm and backported from 3.10 kernel
LowMemoryKiller from latest 3.4 kernel
VFP module optimized for NEON CPUs
Low RAM reserved to logger
GearTools app Built-In (not for ICS)
Disabled Gentle Fair Sleeper for smoother UI
Optimized SLUB Memory Allocator
Optimized some values such as vm_swappiness and much more
Entropy tweaks + Frandom built-in
Using LZO as default kernel compression and updated to latest version
Aligned CPU Access Enabled
Tweaked I/O Schedulers
Entropy patch applied to WiFi driver
Some useful GPU tweaks (all tested)
CPU Governors tweaks and backported from 3.4 Kernel (not all btw)
Updated WiFi Driver
Using same sources for JB3/JBPlus/JB
Optimized ReadAhead
Optimized RCU
Snappy Compression for ZRAM
ZRAM Support as module (use init.d script for this)
SWAP Support
Great Boot and Charging Logo (GearKernel ones)
OC Support up to 1400 MHz
1000 Hz Kernel
RCU Priority Boost Enabled
Using lots of stuff from 3.10 Kernel
BLX Support
Using WestWood TCP Congestion Algorithm
FSync disabled by default
TRIM Enabled
Disabled lots of debug stuff
EFS Patch by me included, no more imei lost risk (If you see wrong imei just reboot phone and imei will be restored )
Improved USB signal quality (thx Talon for this patch)
Default Min CPU Freq 200000 MHz
TREE_PREEMPT_RCU for extreme performance
Using adapted JBPlus sources for ICS
Updated audio drivers
GearKernel Recovery (with lots of features)
ExFat FileSystem support (needs testing)


CPU Governors

Adaptive
Wheatley
LagFree (default)
BrazilianWax
IntelliDemand
InteractiveX
Lulzactive
OnDemandX
Interactive
SmartAss2
Conservative
Hyper
PowerSave
LionHeart
OnDemand
Performance

I/O Schedulers

Noop
DeadLine
SIOPlus (default)
CFQ
BFQv6r1 (backported from 3.4 Kernel)
ROW (backported from 3.4 Kernel)
V(R)
ZEN

Download

GalaxyS
Captivate
Vibrant
GalaxySb

Installazione


Installazione da recovery (versione .zip)


1. Scaricare il kernel in base al vostro modello e alla vostra versione di android in formato zip
2. Inserire il file precedentemente scaricato sulla scheda sd
3. Avviare in recovery (Tasto accensione + tasto centrale + tasto volume su)
4. Selezionare "Install zip" e selezionate il file zippato
5. Riavviate !!

Installazione da Odin (versione .tar)

0. Scaricare il kernel in base al vostro modello e alla vostra versione di android in formato .tar
1. Avviate in modalità download ( Tasto accensione più tasto centrale più tasto volume giù)
2. Avviate odin3 e configurarlo come nella foto qui sotto

3. Collegare il note in modalità download al PC tramite USB
4. Premere start per flashare il pacchetto tar.md5
5. Attendete il riavvio è il gioco è fatto !!!


se vi serve odin lo trovate qui


Ringraziamenti

XDA_Alberto96 autore del kernel
stratosk for his source and all his hard work
pawitp for his kernel
zacharias.maladroit for his useful information about CM's initramfs
Ezekeel for LiveOC, Custom Voltage
sztupy for USB host driver
Phil3759 for Phil'z Touch Recovery
mialwe for his vibrator intensity and other fixes
DerTeufel1980 for various hints and for his kernel app
grinder777 for his great support
n8r for UHID
Morfic for GPU Tweaks
ts1506 for the Init.d scripts idea
N00B_IN_N33D for the GearKernel Logo
NitroOxid for deep testing
​

Fonte: Xda

 

Changelog

Changelog for JBPlus/JB/JB3
Changelog for ICS

 

simoscorpion : thread da aggiornare

Sent from my GT-I9500 using Tapatalk 4

 

ok aggiornato