Il Forum è consultabile solo in modalità lettura. Per domande o consigli iscriviti al nostro GRUPPO FACEBOOK / COMMUNITY cliccando qui

[KERNEL] [JB 4.3][CWM/TWRP/SwitchSD]Mackay kernel 0.599 (07-Dec-2013)

Discussione in 'Modding - Samsung Galaxy S i9000' iniziata da simoscorpion, 24 Ago 2013.

  1. simoscorpion

    simoscorpion Power Droid

    Iscritto:
    26 Lug 2012
    Messaggi:
    45.604
    "Mi Piace":
    11.831
    ATTENZIONE NE IO NE IL FORUM CI RITENIAMO RESPONSABILI PER EVENTUALI DANNI ARRECATI AL TELEFONO
    CHI ESEGUE QUESTA PROCEDURA LO FA A PROPRIO RISCHIO E PERICOLO


    Mackay kernel


    Attenzione: questa versione è compatibile solo con android 4.3 !!

    Caratteristiche

    -Build using the Cortax-A8 optimized Linaro 4.7.4 toolchain of Christopher83:
    -Christopher86's cortex-A8 optimized Linaro toolchain (July version)
    -O3 optimization
    -updated to linux kernel version 3.0.91
    -SLQB memory allocator (default, should be slightly faster)
    -XZ compression of kernel & initramfs
    -395MB RAM
    -SIO scheduler
    -Added Lagfree governor
    -ROW scheduler (tweaked, default scheduler)
    -FIOPS scheduler (tweaked)
    -XZ compression of kernel & initramfs
    -395MB RAM
    -many improvements to IO schedulers in general
    -Deadline tuning (thanks to DerTeufel)
    -Ondemand tuned (default governor)
    -SmartassV2 governor
    -Interactive governor (updated to android 3.4 code + fixes)
    -Wheatley & Lulzactive governors
    -Conservative tuned
    -Call volume hack (use “Settings>Mackay Settings”* to set volumes)
    -Reduced battery polling interval
    -Fast charge (activate through “Settings>Advanced Settings”* or the QuickCharge toggle in MackayROM)
    -WiFi PM_FAST mode selection (activate using “Settings>Mackay Settings”*)
    -Battery life extender (set through “Settings>Mackay Settings”*)
    -CustomVoltage (set using NSTools)
    -BLN (can be enabled through “Settings>Mackay Settings”*)
    -USB OTG support (needs external power supply)
    -1100-1400MHz OC steps
    -Custom kernel splash (Thanks to Malcho)
    -Updated charging logo to match open charger
    -Disabled swap & zram
    -Improve memcopy/memmove
    -Improve the performance of memcpy and memmove
    -Kill task closest in size to memory needed to free
    -LOAD_FREQ (4*HZ+61) avoids loadavg Moire
    -Entropy tweaks:
    -backport CPUIDLE from 3.5
    -arm/crypto: Add optimized AES and SHA1 routines
    -Unaligned CPU access
    -Updates to binder
    -Improvements to RWSEM code
    -Improvements to binder code
    -Improvements to tmpfs
    -Added frandom (much faster random number generator)
    -Updated to lowmemorykiller with PID whitelist (thanks to stratosk)
    -Updated wifi driver to 5.90.195.114
    -Updated GPU driver to DDK 1.8@2198402

    Recovery

    -Mackay recovery (based on CWM 6.0.3.5 & TWRP 2.6.3.0)

    CWM

    -Clear NSTools settings
    -Clear init.d settings
    -Show battery status in recovery
    -Aroma FileManager
    -Include using soft keys to navigate the menu (thanks fishears for the idea)
    -Enable holding keys for repeated presses
    -Themed orange

    T.W.R.P.

    -Themed orange
    -Run recovery-apps (zip files should be present in /system/mackay, launch them through advanced->run app)
    -Build in a script to reboot from twrp to cwm*


    Download

    Download ultime verisioni

    Installazione


    1. Scaricare file in formato zip
    2. Inserire il file precedentemente scaricato sulla scheda sd
    3. Avviare in recovery (Tasto accensione + tasto centrale + tasto volume su)
    4. Selezionare "Install zip" e selezionate il file zippato
    5. Riavviate !!


    Fonte: Xda
     
    Ultima modifica: 19 Nov 2013
  2. simoscorpion

    simoscorpion Power Droid

    Iscritto:
    26 Lug 2012
    Messaggi:
    45.604
    "Mi Piace":
    11.831
    Changelog

    Changelog 0.516
    -Updated to v3.0.101
    -Updated ramdisk for CM10.2 builds after 22-Oct (otherwise resulting in phone FC)
    -Updated ondemand code to the code by stratosk
    -Updated TWRP code

    Vecchie versioni
    Changelog 0.514
    -Updated to v3.0.100

    Changelog 0.513
    -Both CWM (updated to 6.0.4.4) and TWRP
    -Replaced SIO by SIOPLUS
    -Added OndemandX

    Changelog 0.511
    -Added zRAM with a large number of patches (Thanks to DerTeufel!)
    -Updated to linux v3.0.99
    Changelog 0.509
    -Updated to Linux v3.0.98
    -Some small code updates to TWRP

    Changelog 0.508
    -Kernel source code identical to 0.507
    -Three flavours:
    -CWM (updated CWM to 6.0.4.0)
    -CWM / TWRP with swapped SD card mount points.
    Downloads can be found in the respective subfolders of the download-link (should be quite clear from folder & file name what you are downloading)
    Changelog 0.505 compared to previous release (0.416)
    -Only TWRP recovery, updated TWRP to 6.2.3.0
    -Updated to linux kernel version 3.0.97

    Changelog 0.416 compared to previous release (0.415)
    -Several updates to interactive governor
    -Updated Aroma FM included in the kernel

    Changelog 0.415 compared to previous release (0.414)
    -Updated to linux v3.0.96
    -Build with September release of toolchain

    Changelog 0.413 compared to previous release (0.502)
    -Rebuild RAMdisks for SELinux
    -Updated to linux v3.0.94
    -Back to a combined CWM & TWRP
    -Fixed soft-key navigation in CWM
    -Reverted some TCP/IP patch that caused an issue with certain WiFi connections.
    -Latest CWM which was present in 0.502 will backup by default in .tar.gz format. Smaller, but restoring is not supported on older CWM kernels like 0.413. So please make a fresh backup (either in TWRP or CWM) after flashing the 0.413, but only after reboot recovery, because after flashing 0.413 you are still in the new CWM
    recovery of the 0.502 kernel

    Changelog 0.502 compared to previous release (0.407)
    -Rebuild RAMdisks for SELinux
    -Updated to linux v3.0.93
    -ONLY CWM -> No more TWRP
    -Latest CWM will backup by default in .tar.gz format. Smaller, but restoring is not supported on older CWM kernels. Default backup format can be chosen by the user in CWM.
    -Proportional Rate Reduction for TCP
    -Introduce timer slack controller


    Changelog 0.407 compared to previous release (0.406)
    -Rebuild RAMdisks for SELinux
    -Updated to linux v3.0.91
    -Added latest Bluetooth patch



    Mackay settings:

    *“Settings>Mackay Settings” only available with Mackay ROM 3.x.x (to be released soon)
    *also available through the Galaxy S & Mackay app in the launcher

    On other roms, install the kernel, reboot, open /data/local/mackay/bln/recovery/navbar and change the 0 for 1. Then reboot:
    bln (set to 1) BLN will be activated
    chosenrecovery (set to 1) CWM will be activated
    navbar (set to 1) navbar will be activated
    As an alternative, Bejda developed a script for Mackay settings:
    http://forum.xda-developers.com/show...&postcount=953
     
    Ultima modifica: 28 Ott 2013
    A -Odino- piace questo elemento.
  3. simoscorpion

    simoscorpion Power Droid

    Iscritto:
    26 Lug 2012
    Messaggi:
    45.604
    "Mi Piace":
    11.831
    ottimo kernel, con supporto all'overclock fino a 1400, ed inoltre ha la twrp completamente touch e funzionate !!
     
    A -Odino- piace questo elemento.
  4. simoscorpion

    simoscorpion Power Droid

    Iscritto:
    26 Lug 2012
    Messaggi:
    45.604
    "Mi Piace":
    11.831
    uscita la 0.502, per il momento con recovery cwm, in attesa che il tema twrp rilasci i sorgenti per android 4.3
     
    A -Odino- piace questo elemento.
  5. simoscorpion

    simoscorpion Power Droid

    Iscritto:
    26 Lug 2012
    Messaggi:
    45.604
    "Mi Piace":
    11.831
    uscita la 4.1.3 ed è stata reintrodotta la twrp
     
    A -Odino- piace questo elemento.
  6. simoscorpion

    simoscorpion Power Droid

    Iscritto:
    26 Lug 2012
    Messaggi:
    45.604
    "Mi Piace":
    11.831
    uscita la v 0.415
     
    A -Odino- piace questo elemento.
  7. simoscorpion

    simoscorpion Power Droid

    Iscritto:
    26 Lug 2012
    Messaggi:
    45.604
    "Mi Piace":
    11.831
    uscita la v 0.416
     
    A -Odino- piace questo elemento.
  8. simoscorpion

    simoscorpion Power Droid

    Iscritto:
    26 Lug 2012
    Messaggi:
    45.604
    "Mi Piace":
    11.831
    uscita la 0.505
     
    A -Odino- piace questo elemento.
  9. simoscorpion

    simoscorpion Power Droid

    Iscritto:
    26 Lug 2012
    Messaggi:
    45.604
    "Mi Piace":
    11.831
    uscita la 0.509
     
    A -Odino- piace questo elemento.
  10. simoscorpion

    simoscorpion Power Droid

    Iscritto:
    26 Lug 2012
    Messaggi:
    45.604
    "Mi Piace":
    11.831
    uscita la 0.513
     
    A -Odino- piace questo elemento.
  11. simoscorpion

    simoscorpion Power Droid

    Iscritto:
    26 Lug 2012
    Messaggi:
    45.604
    "Mi Piace":
    11.831
    uscita la 0.514
     
  12. euromarco

    euromarco Baby Droid

    Iscritto:
    12 Mag 2013
    Messaggi:
    1
    "Mi Piace":
    0
    scusate. va bene per l's4?
    inoltre quali sono le differenze tra ....CMC-signed.zip e ...cwm_VC-signed.zip
     
  13. simoscorpion

    simoscorpion Power Droid

    Iscritto:
    26 Lug 2012
    Messaggi:
    45.604
    "Mi Piace":
    11.831
    assolutamente no
     
  14. simoscorpion

    simoscorpion Power Droid

    Iscritto:
    26 Lug 2012
    Messaggi:
    45.604
    "Mi Piace":
    11.831
    uscita la v 0.516
     
  15. wappazzo

    wappazzo Baby Droid

    Iscritto:
    19 Ott 2012
    Messaggi:
    20
    "Mi Piace":
    0
  16. simoscorpion

    simoscorpion Power Droid

    Iscritto:
    26 Lug 2012
    Messaggi:
    45.604
    "Mi Piace":
    11.831
    Si va bene, qui pero siamo nel thread della vecchia versione

    Inviato dal mio GT-N5110 utilizzando Tapatalk
     
  17. wappazzo

    wappazzo Baby Droid

    Iscritto:
    19 Ott 2012
    Messaggi:
    20
    "Mi Piace":
    0
    esiste un thread della nuova versione? oppure potresti linkarmi dove scaricare a parte quello già postato da me?
     
  18. simoscorpion

    simoscorpion Power Droid

    Iscritto:
    26 Lug 2012
    Messaggi:
    45.604
    "Mi Piace":
    11.831
    te l'ho linkato nel thread dello script
     
    A wappazzo piace questo elemento.