[KERNEL] [7.6][AOSP&SAMMY][APP/OTA/AUDIO] N.E.A.K. Note2 - Heart Touching

Discussione in 'Modding - Samsung Galaxy Note 2 GSM (N7100)' iniziata da simoscorpion, 20 Lug 2013.

Condividi questa Pagina

  1. simoscorpion

    simoscorpion Administrator Membro dello Staff

    Iscritto:
    26 Lug 2012
    Messaggi:
    45.604
    "Mi Piace":
    11.831

    ATTENZIONE NE IO NE IL FORUM CI RITENIAMO RESPONSABILI PER EVENTUALI DANNI ARRECATI AL TELEFONO,
    CHI ESEGUE QUESTA PROCEDURA LO FA A PROPRIO RISCHIO E PERICOLO



    N.E.A.K. KERNEL
    V 2.2.1
    AOSP & SAMMY ROM



    Nota: versione per N7100 GSM

    Caratteristiche

    Kernel

    • Based on Samsung official sources (updated to N8000u7), updated to 3.0.80
    • Governors: PegasusQ (default), Ondemand, LulzactiveV2, Performance, Conservative (module), Lazy (module)
    • Schedulers: BFQv5r1, Noop, SIO, VR (default)
    • Using JRCU (++smoothness, ++responsiveness)
    • XZ Compression only for KERNEL (--size)
    • Fully compatible with: uNEAK ENGINE, MC Manager, Tegrak's Lulzactive app, Voltage Control, SetCPU, NSTools
    • Fully compatible with 4.1.2 ROMs
    • Fully compatible with 4.2.2 AOSP roms
    • Fixed exynos-mem bug exploit (thx to Sammy)
    • Fixed SDS death bug (thx to Sammy)
    • Wolfson Audio Control (thx to AndiP for the implementation) ----> featured in uNEAK Engine

    Ramdisk e misc:

    • LED Fade support (thx to teamhacksung)
    • Init.d Support
    • CIFS and FUSE built in the kernel (no modules)
    • Android Logger (logcat) already enabled into the kernel
    • Multi-Core Interface (renewed Tegrak's 2ndCore) -----> CLICK HERE for infos
    • FSync Control Interface (thx to Ezekeel - featured into uNEAK Engine)
    • TouchBooster Control (thx to franciscofranco)
    • CM10.1 and derivates support (AOSP)

    CPU/GPU:

    • NO OC!!!! (200-1600Mhz)
    • CPU Undervolt support (thx to netarchy, Entropy512 & AndreiLux)
    • Complete control of freqs/voltages with Voltage Control/SetCPU/uNEAK
    • GPU Overclock/Undervolt & Stepcount Interface (by gm & AndreiLux)
    • Charging current interface support (original by gm, ported by me) ----> AC, USB, MISC and DOCK supported

    Memoria & performance:

    • ARM CPU Topology + Sched_MC (can be enabled via uNEAK Engine, disabled by default)
    • SLQB Memory Allocator (better memory management)
    • Improved memory management functions
    • Allow CPU Unaligned access (++performaces)
    • AFTR ARM Idle Mode (enable via uNEAK Engine) (++battery)

    Tweaks:

    • Stochastic Fair Blue NET Scheduler
    • Veno TCP Congestion Control algorithm
    • Proportional Rate Reduction for TCP
    • Reduced debugging WiFi/BT
    • TCP/IP Tweaks
    • TCP buffer tweaks

    Ottimizzazione :

    • NO EXFAT SUPPORT (do not even ask for it please)
    • Heavily reduced debug system (logcat and last_kmsg support is still there) (++speed, --size)
    • Heavily Optimised TouchBooster logic ----> greatly improved smoothness
    • SW Sync framework support
    • Using Standalone Hotplug driver with non-hotplug governors (thx to gm)
    • 3 CPU cores OFF when screen is locked (thx to arighi for original implementation) ----> with non-hotplug govs
    • Upstream patches and fixes from Linux mainline kernel
    • Compiled with Linaro GCC 4.7 (2013.05) + NEAK CFLAGS (heavily optimised) + Graphite Optimisations + O3 Optimisations
    • Optimised EXT4 filesystem
    • Generally optimised code (removed useless functions and variables, fixed warnings)
    • and many others...


    Download

    ATTENZIONE !!! Scegliere la versione (aosp o smmy) a seconda della vostra rom, non flashate la versione sammy su una rom aosp e non flashate la versione aosp su rom sammy...rischio brick !!!

    Per rom samsung

    V 2.2.1 versione per recovery
    V 2.2.1 versione per odin

    Per rom aosp

    V 2.2.1 versione per recovery
    V 2.2.1 versione per odin

    Installazione


    Da recovery (.zip)

    1. Scaricare file il kernel
    2. Inserire il file precedentemente scaricato sulla scheda sd
    3. Avviare in recovery (volume su+ home + power)
    4. Fare wipe cache e dalvik
    5. Flashate il kernel
    6. Riavviate !!

    Da odin (.ztar)

    1. Avviate in modalità download ( Tasto accensione più tasto centrale più tasto volume giù)
    2. Avviate odin3 e configurarlo come nella foto qui sotto
    [​IMG]
    3. Collegare il note in modalità download al PC tramite USB
    4. Premere start per flashare il pacchetto tar.md5
    5. Attendete il riavvio è il gioco è fatto !!!


    se vi serve odin lo trovate qui




    Fonte : Xda
     
    Ultima modifica: 10 Ago 2013
    A japoco_poz14 piace questo elemento.
  2. simoscorpion

    simoscorpion Administrator Membro dello Staff

    Iscritto:
    26 Lug 2012
    Messaggi:
    45.604
    "Mi Piace":
    11.831
    Changelog


    v2.0.2x (AOSP&SAMMY):
    - Fixed LED notifications issues
    - The default LED trigger is now "none" (aka Disabled), please use the app to configure the LED Alerts


    Vecchie versioni

    v2.0.1x (AOSP&SAMMY):
    - Updated to Linux 3.0.80
    - Fixed CPU stuck at max frequency

    v2.0x (AOSP&SAMMY):
    - Updated to Linux 3.0.79
    - Fixed WiFi issues (and tethering)
    - VENO TCP congestion control algorithm
    - misc: TouchWake --> featured in uNEAK Engine (from v2.0)
    - misc: Kernel LED Alerts --> see above for infos, featured in uNEAK Engine (from v2.0)
    - Enabled CONFIG_AIO
    - Various sched patches (AndreiLux)
    - Linaro O3 Optimisations

    v1.9x (AOSP&SAMMY):
    - Updated to Linux 3.0.74
    - bcmdhd: wifi drivers from I9500 sources
    - mms152_ts: fixing touchbooster bug which may cause being stuck at freq lock (thx to DerTeufel)
    - backport: smp: patches from mainline 3.5
    - ARM: decompressor: Enable unaligned memory access for v6 and above
    - ea8061: Allow brightness to 300 cd
    - Updated from latest sammy rom available

    v1.8x (AOSP&SAMMY):
    - Updated to Linux 3.0.71
    - bcmdhd: wifi drivers from N8000U5 sources (common)
    - wolfson_audio: fixed eq issues (+ misc fixes)
    - wireless: backport from 3.4
    - Upstream android patches
    - fbearlysuspend: reduced msleep to 100ms
    - drivers: mmc: disable CRC
    - mali_r3p1: updated from Note8 sources
    - Add frandom(/dev/frandom)
    - More entropy tweaks
    - timer: hrtimer: Don't check idle_cpu() before calling get_nohz_timer_target()
    - sched: Create sched_select_non_idle_cpu() to give preferred CPU for power saving
    - usb-gadget: Booting from g_file_storage in cdrom mode
    - Updated Linaro toolchain to 2013.03

    v1.7x (AOSP&SAMMY):
    - Linux 3.0.67
    - Updated Wolfson Sound to 1.6.0
    - Mali R3P1 drivers (AOSP)
    - Updated WiFi drivers (AOSP)
    - power: fbearlysuspend draw delay (400ms) ---> fixes CRT on sammy roms
    - rwsem: steal writing sem for better performance
    - tmpfs: fix mempolicy object leaks
    - No more support for CM10 (AOSP)
    - Updated CM10.1 ramdisks

    v1.6x (AOSP&SAMMY):
    - Should solve all the battery drain issues (hopefully)
    - Reverted some patch related to cpuidle and workqueue
    - Dynamically adjust cpufreq_max_limit according to scaling_max (Yank555)
    - Updates and refactorings of post-init tweaks (thx to dorimanx)

    v1.5x (AOSP&SAMMY):
    - Updated to Linux 3.0.61
    - Updated Wolfson Sound to 1.4.9
    - Should fix many mic problems (not tested tho)
    - BFQ updated to v5r1
    - Reworked voltages interface (thx to AndreiLux)
    - wakelock: use single threaded workqueueus
    - Updated CM10.1 ramdisks (AOSP)
    - Now releasing LTE AOSP version (AOSP)

    v1.4x (AOSP&SAMMY):
    5th Release

    v1.3x (AOSP&SAMMY):
    4th Release

    v1.2x (AOSP&SAMMY):
    Third Release

    v1.1x (AOSP&SAMMY):
    Second Release

    v1.0x (AOSP&SAMMY):
    First Public Release
     
    A japoco_poz14 piace questo elemento.
  3. simoscorpion

    simoscorpion Administrator Membro dello Staff

    Iscritto:
    26 Lug 2012
    Messaggi:
    45.604
    "Mi Piace":
    11.831
    uscita la 2.2.1
     
    A japoco_poz14 piace questo elemento.
  4. Blackdevil91

    Blackdevil91 Baby Droid

    Iscritto:
    20 Giu 2012
    Messaggi:
    47
    "Mi Piace":
    0
    Salve a tutti, mi chiedevo se questo kernel è compatibile con la rom omega v19 k monta la versione 4.3 di android x galaxy note 2.
    Grazie in anticipo ;)

    ---------- Post aggiornato alle 13:13 ----------

    Salve a tutti, mi chiedevo se questo kernel è compatibile con la rom omega v19 k monta la versione 4.3 di android x galaxy note 2.
    Grazie in anticipo ;)
     
  5. simoscorpion

    simoscorpion Administrator Membro dello Staff

    Iscritto:
    26 Lug 2012
    Messaggi:
    45.604
    "Mi Piace":
    11.831
    al momento non è compatibile con le rom samsung 4.3
     
  6. Blackdevil91

    Blackdevil91 Baby Droid

    Iscritto:
    20 Giu 2012
    Messaggi:
    47
    "Mi Piace":
    0
    K kernel mi potresti consigliare x questa rom k abbia il fix exynos e il fix sds? Grazie ;)
     
  7. simoscorpion

    simoscorpion Administrator Membro dello Staff

    Iscritto:
    26 Lug 2012
    Messaggi:
    45.604
    "Mi Piace":
    11.831
    per ora il devil è l'unico kernel che supporta le rom samsung 4.3
     
  8. Blackdevil91

    Blackdevil91 Baby Droid

    Iscritto:
    20 Giu 2012
    Messaggi:
    47
    "Mi Piace":
    0
    E quale kernel mi potresti consigliare x questa rom con il fix exynos e il fix sds? Grazie ;)
     
  9. simoscorpion

    simoscorpion Administrator Membro dello Staff

    Iscritto:
    26 Lug 2012
    Messaggi:
    45.604
    "Mi Piace":
    11.831
    te l'ho appena detto

     
  10. Blackdevil91

    Blackdevil91 Baby Droid

    Iscritto:
    20 Giu 2012
    Messaggi:
    47
    "Mi Piace":
    0
    Scusate x il doppio post ma nn mi era aggiornata la pagina, scusatemi e grazie mille x le risposte ;)