[KERNEL] CleanSlate v2.6.1 per HTC U11 (Nougat): Info, Guida & Downlaod

tbalden's
CleanSlate kernel
for HTC U11

​

Version 2.6.8 - 12 of Dicembre, 2017 (ultima versione per Nougat)
Version 2.6.1 - 18 of November, 2017
Version 2.5.0 - 05 of November, 2017
Version 2.4.8 - 01 of November, 2017
Version 2.4.7 - 30 of October, 2017
Version 2.4.6 - 29 of October, 2017
Version 2.3.1 - 15 of October, 2017
Version 2.1.1 - 28 of September, 2017
Version 2.0.0 - 21 of September, 2017
Version 1.8.1 - 17 of September, 2017
Version 1.8.0 - 15 of September, 2017
Version 1.7.3 - 10 of September, 2017
Version 1.6.0 - 27 of August, 2017
Version 1.5.6 - 24 of August, 2017
Version 1.5.2 - 11 of August, 2017
Version 1.4.0 - 2 Agosto 2017
Version 1.2.0 - 15 Luglio 2017
Version 1.0.0 - 17 Giugno 2017

INFORMAZIONE  

Dovrebbe funzionare su ROM basate su firmware 1.03/1.11/1.13/1.16/1.27. Testato su firmware 1.27 Europeo Dual Sim U11.

Caratteristiche:
- Fingerprint doubletap sleep
- Button Light Notification / BLN on Charger and Dim blinking
- Pulsating notification led
- Notification led patterns (6 patterns)
- Chromatic charging led
- Button light / notification led brightness control
- KCAL Color Control (credit to @savoca)
- Button Light Notif doubleblink when detecting short vibrating notifications, BLN number/speed/intensity
- NTFS/ReadWrite
- Hacked texfat loading for all ROM bases to work with sdcard
- doesn't modify system partition. Androidpay should work on phones with stock system image



KCal Color Control on HTC U11:
Color Control free app here: https://play.google.com/store/apps/d...eltweaks&hl=en - Thanks @~clumsy~

Doubletap Fingerprint scanner to sleep:


Pulsating notification LED video:


Button Light Notification:


Chromatic gradient colors for battery percentages while charging..
Will gently pulse green when reaching 100%


Requisiti d'installazione:

- Unlocked HTC U11 con TWRP
-- Testato solo su HTC U11 Europeo (modello dual sim);
- BACKUP: prima del flash fare un backup della sola partizione di BOOT dalla recovery TWRP!!! L' Installazione modificherà solo la partizione BOOT (kernel zImage)
- INSTALLAZIONE: Da Side load, o installa lo zip dalla sdcard via TWRP recovery.


DOWNLOAD:
NOUGAT 2.6.8 -- For Bases 1.27/1.28 installer for TWRP, NOT for OREO:
Installer flashable: https://www.androidfilehost.com/?fid=817906626617952216
Questa è l'ultima versione per Nougat...

Download
VECCHIE VERSIONI:

Anticipazione (Spoiler)

2.6.1 -- For Bases 127/1.28 installer for TWRP:
https://www.androidfilehost.com/?fid=889964283620767022
2.6.0v2 -- For Bases 127/1.28 installer for TWRP:
https://www.androidfilehost.com/?fid=745849072291689060
2.5.0 -- For Bases 1.27/1.28 installer for TWRP:
https://www.androidfilehost.com/?fid=745849072291686451
2.4.10 -- For Bases 127/1.28 installer for TWRP:

https://www.androidfilehost.com/?fid=889964283620763298​

2.4.7 -- For Bases 127/1.28 installer for TWRP:
https://www.androidfilehost.com/?fid=673791459329057512
2.4.6-- For Bases 127/1.28 installer for TWRP:

https://www.androidfilehost.com/?fid=673791459329057347
2.3.1v2-- For Bases 127/1.28 installer for TWRP:
https://www.androidfilehost.com/?fid=745849072291681189​

2.2.1-- For Bases 1.03/1.11/1.13/1.16/127/1.28 installer for TWRP:
https://www.androidfilehost.com/?fid=673791459329049658
2.0.0 -- For Bases 1.03/1.11/1.13/1.16/127/1.28 installer for TWRP:
https://www.androidfilehost.com/?fid=745425885120764454
1.8.1 -- For Bases 1.03/1.11/1.13/1.16/127 installer for TWRP:
https://www.androidfilehost.com/?fid=961840155545596312
1.8.0 -- For Bases 1.03/1.11/1.13/1.16/127 installer for TWRP:
https://www.androidfilehost.com/?fid=961840155545596052
1.7.3 -- For Bases 1.03/1.11/1.13/1.16/127 installer for TWRP:
https://www.androidfilehost.com/?fid=889764386195928717
1.7.0 -- For Bases 1.03/1.11/1.13/1.16/127 installer for TWRP:
https://www.androidfilehost.com/?fid=673368273298983050
1.6.0 -- For Bases 1.03/1.11/1.13/1.16/127 installer for TWRP:
https://www.androidfilehost.com/?fid=817550096634795254
1.5.6 -- For Bases 1.03/1.11/1.13/1.16/1.27 installer for TWRP:
https://www.androidfilehost.com/?fid=961840155545590736
1.5.2 -- For Bases 1.03/1.11/1.13 installer for TWRP:
https://www.androidfilehost.com/?fid=745425885120754898
1.5.0 -- For Bases 1.03/1.11/1.13 installer for TWRP:
https://www.androidfilehost.com/?fid=889764386195921642
1.4.0 -- For Bases 1.03/1.11/1.13 installer for TWRP:
https://www.androidfilehost.com/?fid=745425885120753033
1.3.0 -- For Bases 1.03/1.11/1.13 installer for TWRP:
https://www.androidfilehost.com/?fid=961840155545582665
1.2.0 -- For Bases 1.03/1.11/1.13 installer for TWRP:
https://www.androidfilehost.com/?fid=817550096634786041
1.1.0 -- For Bases 1.03/1.11 installer for TWRP:
https://www.androidfilehost.com/?fid=889764386195910707
1.0.0 -- For Bases 1.03/? installer for TWRP:
https://www.androidfilehost.com/?fid=817550096634779910

_____________________________________________________________________


XDA DevDB Information
tbalden's CleanSlate kernel for HTC U11, Kernel for the HTC U11

Contributors
tbalden
Source Code:https://github.com/tbalden/htc-kernel-ocean

Kernel Special Features: Fingerprint double tap sleep, Color Control, LED tweaks

Version Information
Status: Beta
Current Stable Version: 1.5.2
Stable Release Date: 2017-08-12
Current Beta Version: 1.5.2
Beta Release Date: 2017-08-12

Created 2017-06-17
Last Updated 2017-08-11

FONTE XDA
​

 

Changelogs:
Release 2.6.8 - 13 dec 2017
Release 2.6.6 - 11 dec 2017
- WireGuard alpha support
- minor fixes
- bundling zip with Configuration/Companion apps
Release 2.6.5 - 25 nov 2017
Notification whitelist fix with companion app
Release 2.6.4 - 24 Nov 2017
- notification revamp with companion app
- Kad interrupt with two finger gesture

Release 2.6.3 - 20 Nov 2017
- Screen off when phone put Face Down (default ON, optional)

Release 2.6.2 - 19 Nov 2017
- option to Flashlight notify only face down (default on)
--- /sys/class/leds/indicator/flash_only_face_down 1/0 (1 default)
- option to do Notif Vibration booster only in pocket -- do in proximity and NOT face down
--- /sys/fpf/boost_only_in_pocket 1/0 (1 default)
- adding logic to delay in-pocket blocked KAD and schedule KAD screen to the event of leaving proximity state. Will start KAD like if just triggered at that moment.
Keep your phone in your pocket, incoming notification won't start Ambient Display in the pocket/face-down/poach, but only when you pull it out.
--- /sys/fpf/kad_start_after_proximity_left 1/0 (1 default)

Release 2.6.1 - 18 Nov 2017
- critical UCI fixes

Release 2.6.0 - 15 Nov 2017
- CS companion app
- UCI configuration without rooting from internal memory (/sdcard/uci_user.cfg)
- many new features, configs, extras

Release 2.5.0 - 5 Nov 2017
- Smart Notif Control

Release 2.4.9 - 1 Nov 2017
- set bln_light_level to 20 (most dimmed setting) to fully turn off keys backlight (BLN will still work if you leave them on!). Thanks @jwong.hhf for bringing up the idea.
- fix issues with screen RGB calibration becoming too bright in some rare cases with Kernel Amibent Display
- fix issue with touches getting stuck in very rare cases when using Squeeze-To-Swipe and at the same time touching screen
- shorten KAD screen touch input readiness time, touch events will be working quicker after a three finger touch/squeeze event.

Release 2.4.7 - 30 Oct 2017
- critical fix: rare but present freeze when receiving lots of notifications with Kernel Ambient Display and concurrently using squeeze to sleep/peek gestures. Phone could get stuck. (KCal mutex applied to fix this)
- some cosmetic fixes in Squeeze control.

Release 2.4.4 - 28 Oct 2017
- added vibration based alarm-clock screen-on detection to make sure alarm can work with KAD on.
- usb disconnect now should stop KAD correctly
- fixing Call problems with KAD (still Call needs to be with vibration to work with KAD!)
--- now if KAD is not active at the moment of call, the call should be okay even without.....
------ ....call vibration. Only issue remaining, active KAD screen will conflict with.....
------- .....calls without vibration.
- fix KAD on charger only mode + BLN on, and off the charger it was not blinking

Release 2.4.3 - 26 Oct 2017
- making grayscale to color restore instant (by emulation of small touchscreen events)
- adding KAD cancelling phone call detection based on vibration pattern (1000msec) - still no detection for calls without vibration.
---- without vibration for calls a call screen can conflict with KAD screen / input blocking
- fixing touch input issues with squeeze swipe / KAD touch wake, (should not stuck with active touch points)

Release 2.4.2 - 23 Oct 2017
KAD - three finger gesture / sysfs --> touch screen with 3 fingers, much safer for in-pocket situations than Fingerprint tap.
(FP input is now default blocked for this reason, and this 3 finger gesture is default on.)
------- /sys/fpf/kad_three_finger_gesture 1/0 (default 1) - interrupts KAD and wakes device
- add KAD setting: disable fingerprint input interruption / sysfs
------- /sys/fpf/kad_disable_fp_input (default 1) - blocking fingerprint tap input from waking fully on KAD screen. A fingerprint unlock still gets through
- faster color restore, almost instant (KAD kcal grayscale mask /squeeze peek kcal mask)
- fix touch input mess-up bug
Notifications Switch Control (new name for Low light switch) :
- add very long volUp/Dn gesture to access LowLight/Vib with KAD mode

Release 2.4.1 - 23 Oct 2017
BLN/Notification LED fixes
KAD fixes

Release 2.4.0 - 21 Oct 2017
- Kernel Ambient Display
- notif booster voltage maxed up
- High light/vib switch binding with KAD

Release 2.3.1- 15 Oct 2017
Flashlight notification update:
- Battery optimizations, more deepsleep
- More consistent blinking (with additional alarmtimer based smp idle cpu wake for workqueue)
- Default delay between flashlight blinks is increased to 3 seconds, and the auto increasing of delay time is quicker, for less battery drain
- somewhat shortened blinking for battery saving

Release 2.3.0- 7 Oct 2017
- double VolUp+Down press for Full Light/Vib mode with
- Vibrating Notification Reminder feature
- WLAN non-vital wakelocks blocking
- Wakelock stats enabled with kernel debug fs

Release 2.2.1 - 29 Sep 2017
- fix too long buzz on long VolUp+Down press for Lowlight/vib mode

Release 2.2.0- 29 Sep 2017
- finalized Low light/low vib switch
- blueborne kernel patch

Release 2.1.1- 28 Sep 2017
- Low light switch
- Notification booster update/fixes

Release 2.1.0 - 27 Sep 2017
- Notification Booster feature for Vibration
- Squeeze Control - Squeeze2Swipe update! - revisiting the scrolling smoothness and additional goodies
- Adreno Boost v2.2 - merged from htc m10 cleanslate line
- Flashlight notification - in-kernel feature Updates, new parameters (haptic mode/dim mode/dim period)

Release 2.0.0 - 21 Sep 2017
- Update to htcdev sources base 1.28

Release 1.8.1 - 17 Sep 2017
Flashlight notifications: more parameters, smaller concurrency fix

Release 1.8.0 - 15 Sep 2017
New feature: flashlight notifiaction

Release 1.7.3 - 10 sep 2017
Fingerprint Vib_strength -> is now tuning the Fingerprint unlock haptic feedback strength. Set it to 1 or 0 to have no vibration feedback

Release 1.7.2 - 7 sep 2017
Bln Rgb led sync issue fix

Release 1.7.1 - 6 Sep 2017
BLN/Notifiaction LED pulsating: more fluid transitions for blinking

Release 1.7.0 - 3 Sep 2017
Squeeze2 Swipe feature addition

Release 1.6.0 - 27 Aug 2017
Squeeze2Peek/Keep feature addition
fixing BLN bug accidental RGB led turning off rarely
fixing squeeze_wake/sleep sysfs

Release 1.5.6 - 24 aug 2017
Stutter fix for 1.27 base

Release 1.5.5 - 21 aug 2017
Enhance squeeze2sleep/wake reliability

Release 1.5.4 - 19 aug 2017
Bugfix: squeeze to wake/sleep reliability fix,

Release 1.5.2 - 11 aug 2017
Bugfix: fixing squeeze power threshold setting bug, now it should work for all cases, if you set on Edge Sense settings to 1, Squeeze2Sleep/Wake should work now (Thanks @guidogsbn for reporting and providing so many log files, it helped a great deal!)

Release 1.5.1 - 10 aug 2017
- squeeze to sleep/ wake bound to activate when minimum squeeze power is set in stock Settings of EdgeSense
- fix some minor false positive with squeez functionality

Release 1.5.0 - 8 aug 2017
- squeeze to sleep/ wake
- fixes

Release 1.4.0 - 2 August
- Adding BLN Dim blink mode: 0 on, 1 off / sysfs bln_dim_blink
--- BLN number of dim blinks: 0 infinite 1-50 / sysfs bln_dim_number
- Adding Notification led patterns (0 to 4): Normal / 1Plus 5 / Triple / Triple Up / Triple Down
--- sysfs: bln_pulse_rgb_pattern
- BLN light level modified to dim the normal button light brightness when screen is on, besides the Blink brightness
--- sysfs bln_light_level

- Fixing bug: adding squeeze vibration detection to avoid Button light notification when squeezing with screen off
- Fixing bug: accidental Button lights staying on

Quick explanation:
BLN Dim blink - default BLN is set to six blinks by default, which means after 6 blinks the buttons, if dim blink enabled, will stay blinking dimly (8 times dimmer), except when on charger, then it will be blinking indefinite time till unplug or screen on event.
Notification LED patterns: when pulsating notification led is enabled, you can choose from 5 different patterns (slower and faster patterns available). Default is the normal pulsation.

Release 1.3.0 - July 20
- BLN doubleblink notifications
- BLN parameters: number of blinks, speed, intensity

Release 1.2.0 - July 15
- Chromatic charging LED feature (ported my m10 code to u11 led driver)

Release 1.1.0 - June 21
- Button Light Notification
- Button Light Notification on charger triggered by notification vibration pattern

Release 1.0.0 - June 17
- Initial release
- Pulsating green notification LED

BLN
sysfs: /sys/class/leds/indicator/
---- bln - 1/0 - BLN on/off
---- bln_no_charger - 1/0 - BLN on when not on charger
or only on charger based on vib pattern
---- bln_rgb_pulse - 1/0 - pulsating Green led
---- bln_rgb_batt_colored - 1/0 - Chromatic charging LED on/off

 

Riservato

 

Nuova versione 1.8.0 del 15/09/2017 funzionante su base 1.03/1.11/1.13/1.16/1.27.

Download

Da installare tramite TWRP:
https://www.androidfilehost.com/?fid=961840155545596052

 

Nuova versione ..... siamo alla 1.8.1.

Changelogs, how-tos
Release 1.8.1 - 17 Sep 2017
- Flashlight notifications: more parameters, smaller concurrency fix

Aggiornato il primo post...

 

Modificato il primo post con nuovi aggiornamenti del kernel...

 

Nuovo aggiornamento del Kernel.... siamo alla 2.3.1 del 15/10/2017...aggiornato il primo post...

 

Nuova versione del Kernel... aggiornato il primo post...

 

Ancora un piccolo aggiornamento importante che corregge alcuni bug della versione precedente.... siamo alla 2.4.7...aggiornato il primo post...

Update 2.4.7 stable

- critical fix: rare but present freeze when receiving lots of notifications with Kernel Ambient Display and concurrently using squeeze to sleep/peek gestures. Phone could get stuck. (KCal mutex applied to fix this)
- some cosmetic fixes in Squeeze control.

 

Ancora aggiornamenti sempre più frequenti.... saimo arrivati alla versione 2.5.0 con piccoli aggiustamenti..aggiornato il primo post..

 

Nuovo aggiornamento del 18/11/2017 .... versione 2.6.1 con piccoli fix...aggiornato il primo post...

 

Fatto aggiornamento dei post, questo è l'ultimo, relativo al kernel per Nougat....