[KERNEL] [KERNEL] ElementalX 7.00 Marshmallow Sense & GPE

Discussione in 'Kernel & Mod M8' iniziata da uLtiMo125, 1 Mag 2014.

Condividi questa Pagina

  1. uLtiMo125

    uLtiMo125 Super Moderator Membro dello Staff

    Iscritto:
    19 Dic 2010
    Messaggi:
    7.339
    "Mi Piace":
    4.117
    [​IMG]
    Kernel for HTC One (m8) Sense and Google Play Edition
    (Not for Sprint or Verizon)​







    [​IMG]

    FEATURES
    • Easy installation with Aroma installer
    • overclocking/underclocking
    • gboost for enhanced gaming performance
    • choose voltage profile in installer
    • full user voltage control
    • optional sweep2sleep
    • optional custom wake gestures (no motion required!)
    • High Definition Audio capability
    • optional USB fastcharge
    • customize vibration strength
    • remove /system write protection
    • NTFS r/w and exFAT support
    • option to disable fsync
    • option to disable magnetic cover
    • /dev/frandom support
    • Advanced color control
    • multirom support
    • DriveDroid support

    DOWNLOADS

    EX Kernel Manager (Official app and best kernel manager for Android)

    Sense (Android 6.0)
    ElementalX-m8-7.00-Sense

    GPE (Android 6.0)
    ElementalX-m8-6.03-GPE

    Sense (Android 5.0.1/5.0.2)
    ElementalX-m8-4.05-Sense

    VECCHI DOWNLOADS
    Sense (Android 6.0)
    ElementalX-m8-6.03-Sense

    Sense (Android 6.0)
    ElementalX-m8-6.02-Sense

    GPE (Android 6.0)
    ElementalX-m8-6.02-GPE

    Sense (Android 5.0.1)

    Sense 5.0.1/5.0.2:
    ElementalX-m8-4.05-Sense

    GPE 5.1:
    ElementalX-m8-5.01-GPE

    ElementalX-m8-4.04-Sense
    Google Play Edition (Android 5.0.1)

    ElementalX-m8-3.03-GPE
    Sense (Android 4.4.4)

    ElementalX-m8-2.00-Sense
    Sense (Android 4.4.3)

    ElementalX-m8-1.08-Sense
    Sense (Android 4.4.2)

    ElementalX-m8-0.19-Sense
    GPE (Android 4.4.4)

    ElementalX-m8-1.08-GPE
    GPE (Android 4.4.3)

    ElementalX-m8-1.00-GPE

    NOTE

    ElementalX Configuration File
    Your choices in the Aroma installer are used to build a configuration file. The config file is located at /etc/elementalx.conf. You can edit this file to change kernel settings. Whatever is set in this file will take effect when the device is booted (unless other scripts or apps interfere!)

    If settings are not sticking:[*]Make sure you have busybox installed correctly and updated to the latest version[*]Make sure the file permissions for /etc/init.d/99elementalx are set to execute.[*]Check to see if any /etc/init.d scripts or apps (such as Kernel Tuner or TricksterMod) are interfering with your settings.


    ElementalX Log File
    Every boot, a log file is created at /data/local/tmp/elementalx-kernel.log. This file shows the date and time and all settings that have been applied. Use this to verify and troubleshoot configuration options.


    Overclocking
    Overclocking is optional. The installer lets you choose the maximum frequency. Whatever frequencies you chose in the installer will be set at boot for each CPU. Not all devices can handle overclocking. I don't recommend overclocking, this device is fast enough. If you overclock, the CPU frequency will likely be throttled due to heat. I recommend the stock frequencies, as this device is plenty fast.


    CPU voltages
    The installer allows you to choose from several undervolting options: stock, -15mV, -30mV, or -45mV. This only undervolts the lowest frequency, which happens to be the frequency used the most, and this is safer. Be careful, lowering voltages can cause instability.


    gboost
    gboost enhances gaming performance by giving a slight boost to cpu frequencies when the graphics load is high (e.g. while gaming). It should have no effect on battery life during regular usage, so it's safe to leave it enabled all the time.


    fsync
    fsync can be disabled if you're looking for the last ounce of performance. I recommend leaving it enabled as there is a slight risk of data loss if your phone shuts off unexpectedly before filesystems are synced.


    Installing a new ROM
    If you install a new ROM, it will probably replace this with the stock kernel and will definitely overwrite /etc/init.d/99elementalx and /etc/elementalx.conf so you will lose your settings and certain features. So always reinstall the kernel after installing a ROM.


    Sweep2sleep
    Sweep2sleep allows you to put your device to sleep by swiping right to left across the bottom of the screen where the back, home, recent buttons are. I find this useful since the stock motion gestures do not provide a good way to turn off the screen.

    /sys/android_touch/sweep2sleep

    0= disabled
    1= sweep2sleep right enabled
    2= sweep2sleep left enabled
    3= sweep2sleep left and right enabled


    USB fastcharge
    USB fastcharge is optional. This will allow you to charge at a faster rate when connected to a USB port. The default limit for USB ports is 500ma, this increases it to 1100ma. Be sure that the computer/laptop/whatever you are plugged into can handle it. Some will automatically cap it at 500ma. Please note that this does not force AC charge mode like previous implementations of force fastcharge. Your battery setting will still say USB mode. You can edit /etc/elementalx.conf to change the setting on boot.


    Wake Gestures

    There are three modes
    • Mode 1: Stock Motion Launch Gestures
      For stock motion launch gestures, /sys/android_touch/wake_gestures, /sys/android_touch/sweep2wake and /sys/android_touch/doubletap2wake must all be set to 0. Enabling any of these overrides the stock gestures. Obviously Motion Launch Gestures must be enabled in the system settings.

    • Mode 2: Remove motion requirement
      For this, you must set /sys/android_touch/wake_gestures to 1 and enable at least one gesture in /sys/android_touch/sweep2wake or /sys/android_touch/doubletap2wake and Motion Launch Gestures must be enabled in system settings. In this mode, when you sweep or doubletap, the appropriate input events are generated and acted upon the EasyAccessService (i.e., the system app that handles gesture actions).

    • Mode 3: Traditional S2W/DT2W
      In this mode, wake gestures and actions are handled entirely by the kernel. The gestures will turn on the screen and that's it. For this, youmust set /sys/android_touch/wake_gestures to 0 and enable at least one gesture in /sys/android_touch/sweep2wake or /sys/android_touch/doubletap2wake. It doesn't matter if Motion Launch Gestures is enabled or disabled in system settings, the gestures don't interact with it in this mode.


    Options

    For modes 2 and 3, there are several options.
    • Sweep2Wake

      Gesture........Value
      Sweep right......1
      Sweep left........2
      Sweep up.........4
      Sweep down....8

      Add up the values for each gesture you want to enable and put the total in /sys/android_touch/sweep2wake. For example, to enable all gestures, the value is 15 (1+2+4+8). To enable sweep right, sweep left and sweep up, the value is 7 (1+2+4)

    • DoubleTap2wake

      Set /sys/android_touch/doubletap2wake to 1 to enable DT2W, and set to 0 to disable it.

    • Pocket Detection

      Set /sys/android_touch/pocket_detect to 1 to enable pocket detection, and set to 0 to disable it. Pocket detection is experimental right now, I'd say it's about 90% functional, but there is an occasional bug where it either doesn't work or works too well.

    • Vibration Strength

      Haptic feedback can be enabled for the wake gestures in /sys/android_touch/vib_strength. This setting takes a number between 0 and 60. Default is 20, which is the same vibration as the stock gestures. Setting this to 0 disables haptic feedback.



    SOURCE
    https://github.com/flar2/m8-Sense-5.0.1
    https://github.com/flar2/m8-GPE-5.0.1
    https://github.com/flar2/m8-Sense-4.4.4
    https://github.com/flar2/m8-GPE-4.4.3
    https://github.com/flar2/m8-Sense-4.4.3


    .....................................................


    XDA:DevDB Information
    ElementalX-m8, Kernel for the HTC One (M8)

    Contributors
    flar2
    Source Code: https://github.com/flar2/

    Kernel Special Features:

    Version Information
    Status: Stable
    Current Stable Version: 6.02
    Stable Release Date: 2015-12-06

    Created 2014-04-04
    Last Updated 2015-12-06
     
    Ultima modifica: 17 Apr 2016
    A kalel77 piace questo elemento.
  2. uLtiMo125

    uLtiMo125 Super Moderator Membro dello Staff

    Iscritto:
    19 Dic 2010
    Messaggi:
    7.339
    "Mi Piace":
    4.117
    [​IMG] CHANGELOG

    Oct 7, 2014: ElementalX-m8-1.08

    -fix backlight setting in installer


    Oct 6, 2014: ElementalX-m8-1.07
    -update backlight dimmer
    -lyapota's sound tweaks
    -fix pocket detection


    September 14, 2014: ElementalX-m8-1.06
    -fix backlight dimmer setting in installer


    September 14, 2014: ElementalX-m8-1.04
    -add backlight dimmer option
    -update to fauxsound 3.6


    September 10, 2014: ElementalX-m8-1.04
    -kexec-hardboot
    -update msm-sleeper


    Aug 25, 2014: ElementalX-m8-1.03
    --update latest HTC source code
    --various optimizations


    Aug 8, 2014: ElementalX-m8-1.02
    -update fauxsound drivers


    Aug 3, 2014: ElementalX-m8-1.01-Sense
    -update installer


    Aug 3, 2014: ElementalX-m8-1.01-GPE
    -update HTC source code for GPE 4.4.4
    -update installer
    -fix touch driver not loading


    July 27, 2014: ElementalX-m8-1.00-Sense
    -update to latest HTC source code
    -fix CIFS support
    -compatibility with ElementalX Kernel app
    -add vibration setting to elementalx.conf


    June 20, 2014: ElementalX-m8-0.19
    -lz4 compression
    -stereo call recording support
    -security updates
    -various tweaks and optimizations
    -custom Venom Tweaks support
    -wake gestures: compatibility with Dot View Case


    June 3, 2014: ElementalX-m8-1.00-GPE
    -update for GPE Android 4.4.3


    May 25, 2014: ElementalX-m8-0.18
    -add proximity enabled flag
    -adjust sensor initialization


    May 24, 2014: ElementalX-m8-0.17
    -O3 optimization
    -allow more time for sensor initialization
    -adjust gesture algorithm to better prevent accidental sweeps
    -added some debugging messages for proximity detector (Sense version only)


    May 19, 2014: ElementalX-m8-0.16
    -build with Linaro GCC 4.9.1 toolchain (@Christopher83)
    -boot delay for custom wake gestures
    -GPE version added


    May 13, 2014: ElementalX-m8-0.15
    -option to disable volume buttons launch camera in landscape


    May 12, 2014: ElementalX-m8-0.14
    -fix custom gestures in dot view mode
    -improvements to pocket detection
    -fix startup of mcu
    -update installer


    May 9, 2014: ElementalX-m8-0.13
    -fix vibrations during phone calls when wake gestures enabled
    -fix proximity sensor not working properly during calls
    -fix wake gestures not working with certain firmware
    -update installer


    May 7, 2014: ElementalX-m8-0.12
    -update slimbus oc (poondog/zeroinfinity)
    -fix installer (incorrect vibration setting)


    May 7, 2014: ElementalX-m8-0.11
    -add wake gestures
    -add sweep2sleep options
    -update installer


    April 29, 2014: ElementalX-m8-0.10
    -enable high definition audio
    -remove hardfloat flag
    -add GPU governor option
    -add GPU underclocking
    -update installer (thanks [MENTION=2262596]jonas2295[/MENTION] for the new splash!)


    April 20, 2014: ElementalX-m8-0.9
    -update installer
    -adjust voltages
    -add underclocking
    -add option to disable magnetic cover sensor
    -reduce logspam
    -fix pvs readout


    April 14, 2014: ElementalX-m8-0.8
    -update installer
    -adjust oc voltages
    -change undervolting
    -add voltage control (thanks [MENTION=4152171]myfluxi[/MENTION])


    April 13, 2014: ElementalX-m8-0.7
    -update installer
    -add gboost
    -bump oc voltages


    April 12, 2014: ElementalX-m8-0.6
    -update to HTC 1.54 kernel source
    -add option for reduced button vibration
    -add faux123 sound support
    -use custom dt.img


    April 10, 2014: ElementalX-m8-0.5
    -add max screen off frequency (default 1090MHz)
    -fix overclocking and adjust voltages
    -add more overclocking steps
    -add thermal options


    April 6, 2014: ElementalX-m8-0.4
    -update ramdisk
    -update installer
    -revert some changes so stock modules will load
    -show pvs bin in sysfs
    -exfat working (uses stock texfat module)
    -remove F2FS support
    -use stock wifi module
    -add CIFS and NTFS support
    -add PS3 controller support
    -tcp congestion control options
    -add DriveDroid support


    April 5, 2014: ElementalX-m8-0.3
    -add Aroma installer
    -overclocking
    -undervolting options


    April 4, 2014: ElementalX-m8-0.2
    -Fastcharge for HTC One m8
    -LCD_KCAL Colour Control for m8
    -exFAT support
    -FS: import F2FS
    -fix for app-mounted directories
    -DRIVERS: SLIMBUS: initial overclocking


    April 4, 2014: ElementalX-m8-0.1
    -Add fsync disable option
    -Add pronto wlan driver
    -Add sweep2sleep
    -usb: gadget: mass_storage: added sysfs entry for cdrom to LUNs
    -ARM CPU Topology and cpu_power driver
    -allow moc-crypto modules to load
    -Add SIO and FIOPS i/o schedulers
    -Add /dev/frandom support
    -Initial Commit: HTC Source g278eae8
     
    Ultima modifica: 17 Apr 2016
    A kalel77 piace questo elemento.
  3. uLtiMo125

    uLtiMo125 Super Moderator Membro dello Staff

    Iscritto:
    19 Dic 2010
    Messaggi:
    7.339
    "Mi Piace":
    4.117
    [​IMG] RISERVATO
     
    Ultima modifica: 17 Apr 2016
  4. uLtiMo125

    uLtiMo125 Super Moderator Membro dello Staff

    Iscritto:
    19 Dic 2010
    Messaggi:
    7.339
    "Mi Piace":
    4.117
    AGGIORNATO PRIMO POST !!


    DOWNLOADS


    Google Play Edition (Android 5.0.1)
    ElementalX-m8-3.01-GPE


    Sense (Android 4.4.4)

    ElementalX-m8-2.00-Sense



    FEATURES




    • Easy installation with Aroma installer
    • overclocking
    • gboost for enhanced gaming performance
    • choose voltage profile in installer
    • full user voltage control
    • underclock CPU or GPU
    • i/o schedulers: FIOPS, SIO, CFQ, NOOP, ROW, deadline
    • optional sweep2sleep
    • optional custom wake gestures (no motion required!)
    • optional pocket detection (with custom wake gestures)
    • option to disable volume button wakes camera (with custom wake gestures)
    • High Definition Audio capability
    • optional USB fastcharge
    • option to reduce vibration strength
    • remove /system write protection
    • NTFS r/w, CIFS, exFAT support
    • option to disable fsync
    • option to disable magnetic cover
    • /dev/frandom support
    • color control
    • multirom support
    • DriveDroid support
    • optimized -O3 linaro 4.9.1

     
  5. kalel77

    kalel77 Honorary Member

    Iscritto:
    10 Lug 2013
    Messaggi:
    12.999
    "Mi Piace":
    8.570
    UPDATE LAST VERSION

    ElementalX-m8-4.03-Sense


    Changelog:
    -fix touchscreen not responding
    -fix selinux a bit more
    -disable secure touch
     
  6. kalel77

    kalel77 Honorary Member

    Iscritto:
    10 Lug 2013
    Messaggi:
    12.999
    "Mi Piace":
    8.570
    Aggiornato il thread alla versione 4.0.4 sense, link al primo post
     
    A uLtiMo125 e Andreasworks piace questo messaggio.
  7. labronico

    labronico Worker Droid

    Iscritto:
    14 Dic 2010
    Messaggi:
    422
    "Mi Piace":
    394
    Che app posso mettere per controllare l'undervolt?
     
  8. kalel77

    kalel77 Honorary Member

    Iscritto:
    10 Lug 2013
    Messaggi:
    12.999
    "Mi Piace":
    8.570
    Kernel Toolkit e' valido ed e' montato in default sulla SD LINK
     
    A labronico piace questo elemento.
  9. Andreasworks

    Andreasworks Silver Droid

    Iscritto:
    14 Nov 2014
    Messaggi:
    2.747
    "Mi Piace":
    1.181
    A kalel77 e uLtiMo125 piace questo messaggio.
  10. kalel77

    kalel77 Honorary Member

    Iscritto:
    10 Lug 2013
    Messaggi:
    12.999
    "Mi Piace":
    8.570
    A uLtiMo125 e Andreasworks piace questo messaggio.
  11. labronico

    labronico Worker Droid

    Iscritto:
    14 Dic 2010
    Messaggi:
    422
    "Mi Piace":
    394
    kalel77 ho flashato questo kernel... Mi consigli i settaggi giusti per aumentare un pò la mia autonomia? Per settare il kernel ho scaricato l'apk kernel toolkit... Mille grazie

    Inviato dal mio HTC One M8 utilizzando Tapatalk
     
  12. uLtiMo125

    uLtiMo125 Super Moderator Membro dello Staff

    Iscritto:
    19 Dic 2010
    Messaggi:
    7.339
    "Mi Piace":
    4.117
    labronico
    ... questi di seguito sono i miei settaggi, che mi sono stati consigliati e che attualmente uso su M8 con ElemenatlX 4.05 e Viper 4.6.0

    CPU scalingMin frequency 300mhz
    Max frequency 1574mhz(or what you want)
    Scaling governor ONDEMAND


    GPU scaling
    Max frequency 578mhz
    Scaling Governor msm-adreno-tz


    I/O Control
    sheduler ROW
    Read ahead buffer 256kb (128)


    Power Management
    Pnpmgr OFF
    Mpdecision ON (o PowerSaver)
    Intelliplug OFF
    USB Fast charge ON


    Screen OFF Max freq 654
    Z-RAM ON
    F-SYNC OFF


    MPU Voltages -50mv


    (Non impostare all'avvio finché non si è sicuri che il telefono funzioni senza riavvi)
     
    A labronico piace questo elemento.
  13. kalel77

    kalel77 Honorary Member

    Iscritto:
    10 Lug 2013
    Messaggi:
    12.999
    "Mi Piace":
    8.570
    Sono quelli più o meno che ho sempre consigliato su xda

    Inviato da Tuttoandroid
     
    A labronico piace questo elemento.
  14. Andreasworks

    Andreasworks Silver Droid

    Iscritto:
    14 Nov 2014
    Messaggi:
    2.747
    "Mi Piace":
    1.181
    ...ho visto che hai chiesto per led di notifica ...sentiamo cosa dicono ...

    ...pardon ..pensavo di essere sulla discussione della viper .

    Inviato da M8
     
  15. Andreasworks

    Andreasworks Silver Droid

    Iscritto:
    14 Nov 2014
    Messaggi:
    2.747
    "Mi Piace":
    1.181
    Sto provando anch'io questi settaggi ...

    Inviato da M8
     
  16. uLtiMo125

    uLtiMo125 Super Moderator Membro dello Staff

    Iscritto:
    19 Dic 2010
    Messaggi:
    7.339
    "Mi Piace":
    4.117
    :thumb:

    poi facci sapere le tue impressioni !!
     
    A Andreasworks piace questo elemento.
  17. Andreasworks

    Andreasworks Silver Droid

    Iscritto:
    14 Nov 2014
    Messaggi:
    2.747
    "Mi Piace":
    1.181
    Direi che qualcosa meno consuma e gira pur sempre liscio ...
    Una domanda un po' OT : la posizione di Google la tenete attiva ? Mi pare consumi parecchio e non vedo tutta questa utilità ...

    Inviato da M8
     
  18. kalel77

    kalel77 Honorary Member

    Iscritto:
    10 Lug 2013
    Messaggi:
    12.999
    "Mi Piace":
    8.570
    la posizione su risparmio, cronologia posizione disattivata cosi' come g now
     
  19. Andreasworks

    Andreasworks Silver Droid

    Iscritto:
    14 Nov 2014
    Messaggi:
    2.747
    "Mi Piace":
    1.181
    Si anch'io ...g now però l ho lasciato per alcune volte usare la ricerca vocale in rete o per dettare un messaggio ...

    Inviato da M8
     
  20. uLtiMo125

    uLtiMo125 Super Moderator Membro dello Staff

    Iscritto:
    19 Dic 2010
    Messaggi:
    7.339
    "Mi Piace":
    4.117

    io ho tutto attivo ... che senso ha avere uno "smart" phone se poi disattiviamo tutto ?!?!?
    e poi per cosa ?!?! ... per battere il record di durata batteria ?!?!

    mi 'mporta un fico secco ... a me basti duri la giornata
    cmq sia ogni sera lo rimetto a caricare, indipendentemente dalla carica residua !!

    se pur devo dire che ultimamente arrivo a sera con difficoltà sarà colpa dello "smart watch" ?!?!?
    bluetooth + wifi + gps + dati - tutto sempre attivo !!!! :/
     
    A jackfree5 e kalel77 piace questo messaggio.