[KERNEL] [KK-4.4.2][51xx]SphereKat-Rev5.4[24/aug/2014]

ATTENZIONE NE IO NE IL FORUM CI RITENIAMO RESPONSABILI PER EVENTUALI DANNI ARRECATI AL TABLET
CHI ESEGUE QUESTA PROCEDURA LO FA A PROPRIO RISCHIO E PERICOLO

SphereKat
​

Compatibile solo con GT-N5100/N5110/5120 e con rom 4.4.2 samsung

Feature


Differenze dalla stock:

• SELINUX protection included but set at Permissive = No problems wit apps like Paragon and Titainium.
• SELinux control with Synapse
• S-Pen Alignment fixed
• Default Speeds 200MHz-1600MHz
• Activating Saving power will result into 200MHz-1100MHz.
• Init.d support
• ARCH-Power enabled
• DynamicFSYNC = Use Terminal command or Trickster Mod app. = enabled by default.
• Memory Leak fixed
• mmc cap erase disabled ( just as a precaution )
• IKCONFIG_PROC support

Driver support included in kernel:

• NTFS_RW / FAT / FAT32 / EXFAT support
• 3Gusb Support (ppp widget)
• CIFS / UFS / ISO9660 / UDF_FS / HF / HF_PLUS
• Realtek RTL8192CU/RTL8188CU USB Wireless Network Adapter support
• Ralink driver support : Ralink rt2500 (USB) / Ralink rt2501/rt73 (USB) / Ralink rt27xx/rt28xx/rt30xx(USB)/rt2800usb - Include support for rt33xx , rt35xx , rt53xx
• Extra Drivers: MAC80211 / RTL8187 / EEPROM_93cx6 Support
• Boeflla 1.6.0 Sound engine support
• OTG Audio dock , Car dock support

Advanced users support

• OC & UV support for CPU
• Max CPU speed is 1920MHz
• Min CPU speed is 100MHz
• Governors: Adaptive, Pegasusq, Interactive, Powersave, Performance, Ondemand, Userspace, Pegasusq, ZZmoove.
• Schedulers: cfq, Noop, Deadline, Row, Sio, VR
• Extra TCP wifi connection added: Westood, reno, htcp, vegas, veno.

Download

CivZ-SphereKat-GT-N51xx

Installazione

1. Roottare e mettere una recovery custom
2. Copiare lo zip sul device
3. Andare in recovery mode (Tasto accensione + tasto centrale + tasto volume su)
4. Fare un wipe dalvik e cache
5. Installare lo zip
6. Riavviare

Fonte : Xda

 

Changelog

24/08/2014 REV5.4 released
Synapse settings updated
Updated toolchain arm-2010q1(202) from "code sourcery"
GPU Overclocking thanks ZaneZam / DerTeufel / AndreiLux
GPU settings are:
Step0 54MHz = new Idle step = when in browser mode and no gaming this low GPU speed will help save power
Step1 266MHz
Step2 350MHz
Step3 533MHz = new speed foe step3 for better performance in drawing
Step4 700MHz = New OC speed for the better gaming performance
GPU settings are not editable and hard set in the kernel
Corrected CPU freq going above scaling_max thanks to Yank555.lu

vecchie versioni

Anticipazione (Spoiler)

17/07/2014 Rev5.1 is released
Different setting for Dynamic Hotpluging, less agressive
Frandom added and enabled
CPU slope changed like on the JB kernel
Dirty writeback
Various performance tweaks
Toolchain arm-2010q1 from "code sourcery" uploaded for the people that want to compile it with this toolchain (look in the kernel folder) as suggested by Samsung for the Note8.0 KitKat
Github updated to Rev5.1
...............


06/Jul/2014 Rev4.2 - support for the 5110 , 5100 & 5120
Balanced the voltage settings



28/Jun/2014 Rev4.0 - 5110 Released: (support for the 5100 & 5120 will follow later)
Merged with official Samsung KK source = fixes all existing problems with wakelock and many other optimizations for our device

20/Jun/2014 Rev3.8 Released:
Hotplug rework
Ramdisk changes for the s-pen

Final release for a long time.


15/Jun/2014 Rev3.4 Released:
Bus_freq changes
A ton of missing driver commits for the KONA device added
Autobacklight 0.0 lux light problem fixed, no it works correctly even in a dark room
That is the problem working with a kernel that isn't for this device. You need to debug and add the stuff that is missing.


10/Jun/2014 Rev3.1 Released:
Ramdisk changes
Interactive set on all parameters as startup and default governor, this to prevent lockup of cores on boot.
Synapse SELinux status oprion, change to ENFORCED & PERMISSIVE , default is permissive
Small tweaks in kernel boot_up custom script.


07/Jun/2014 First Public release Rev2.0

08/Jun/2014 First Public release Rev2.1
GPU step 5 included, now max it will go to 533MHz
Auobrightness sensor fixes part2
CPU sloop adjusted
zzmoove profile nr8.

09/Jun/2014 First Public release Rev2.2
Memory Leak fix cpu stats
Memory Leak fix Kernel Ext4 & Power
zzmoove profile nr6.
I recommend not to use Interactive and Powersave governor as they are buggy.

09/Jun/2014 First Public release Rev3.0
Selinux included in the kernel as more security is better. This is the reason why I bumded to Rev3.0 to make a clear difference.
This kernel got Selinux Permissive state as it supports more apps like TiTaniumbackup.
Reverting back to a Selinux enforced Kernel (stock) is no longer a problem from Rev3.0 and up.
You can set Selinux Status with terminal command to ENFORCED with "setenforce 1". Or use a init.d script to have it on reboot also on ENFORCED.
You want to know why this kernel comes with Selinux included, google for Selinux and search your answers.
Governors , powersave, userspace = Disabled as they are useless and buggy.

 

***
uscita la v 3.4 ***

 

*** uscita la v 3.8 anche per N5100 e n5120***

 

*** uscita la rev 4.0 ***

 

*** uscita la v 4.2 ***

 

**** uscita la rev 5.1 ***

 

**** uscita la rev 5.4 ***