[KERNEL] [LG G5/H850][7.0] Asgard Kernel V5.7

Discussione in 'Rom e Kernel per G5' iniziata da Killua96, 17 Mag 2017.

Condividi questa Pagina

  1. Killua96

    Killua96 Super Moderator Membro dello Staff

    Iscritto:
    16 Nov 2013
    Messaggi:
    10.662
    "Mi Piace":
    3.543
    ATTENZIONE  

    - NE IO NE TUTTOANDROID CI ASSUMIAMO RESPONSABILITA' ALCUNA PER DANNI ARRECATI DALL' USO DI QUESTA GUIDA/MATERIALE
    - E' VIETATO RIPORTARE QUESTA GUIDA O PARTE DI ESSA SU ALTRI FORUM SENZA L'AUTORIZZAZIONE DELL'AUTORE!




    Requisiti:

    - LG G5 H850 (Disponibile anche per altre versioni ma la guida si riferisce a questa)
    - Bootloader sbloccato, Qui trovate la guida.
    - L'ultima TWRP installata, trovate Qui la guida
    - Avere installato Android 7.0 Nougat

    Funzionalità:
    *Based off of https://github.com/jcadduono/android_kernel_lge_msm8996 as original source.
    *Compiled using [TOOLCHAIN]UBER Toolchains - v6.x
    *Added Westwood as default TCP Congestion
    *KCAL
    *Disabled CRC check
    *Battery improvements
    *Selinux set to Permissive
    *Added Gov's - alucard, bioshock, blu_active, conservativex, despair, electrodemand, elementalx, HYPER, intellidemand, intellimm, ironactive, lightning, lionfish, lionheart, nebula, nightmare, ondemand_x, pegasusq & wheatley.
    *Added IO - bfq, fifo, fiops, sio, sioplus, tripndroid, vr & zen.
    *Added TCP - A lot.
    *Sound Control (Only Headphones)
    *Adrenoboost (Default Off)
    *Dynamic Fsync and Fsync Toggle
    *Vibration Control
    *Removed verifiedbootstate flag
    *Replaced Interactive Gov with one from the OP3 (Removed Triton and Cancun)
    *A lot of other changes throughout the kernel
    *Working on Fulmics*
    Changelog:
    #V5.7

    *Spectrum Support - thanks again to @acuicultor for his Radioactive kernel for OP3 and @frap129 for spectrum! (only changes I made to the init.spectrum.rc settings (from acuicultors Radioactive kernel) are, removed adreno idler lines and changed max freq to 2150.)
    *Updated blu_active gov - thanks to @eng.stk
    *Updated Conservative and Ondemand (Despair as well to fix compile) to use cache tunables - thanks to @flar2
    *Added Dynamic Interactive and dancedance govs.
    *Boost 'cpubw' on screen wake-up - This makes our DDR bus
    use its maximum bandwidth when the screen is turned on, boost duration to 5000 ms. - thanks to @Sultanxda and @dorimanx
    *...no more lag in sound....
    *Plenty more misc changes, all thanks to @franciscofranco, and everyone/anyone else I forgot to mention......

    #V5.6

    *Plenty more misc changes.................................all thanks to @franciscofranco, @jimbo77 and everyone/anyone else I forgot to mention.

    #V5.5
    *Bluetooth working again........[​IMG]
    *Removed Arch power and Adeno idler
    *Plenty more misc changes.................................

    #V5.4

    **RS988 test**
    *Added the last few TCP
    *Whole lot more changes....hopefully for the better.

    #V5.3

    **RS988 test**
    *Added BFQ IO
    *Some more govs - barry_allen, mythx_plug, ondemandplus and wave.
    *few more misc changes

    #V5.2

    *Added Adreno Idler - thanks to @arter97
    *Arch_power - thanks to @neobuddy89
    *Removed chill/relaxed govs
    *few more misc changes

    #V5.1

    *Added CRC toggle - thanks to @farovitus
    *Removed electroactive gov
    *Added Govs - cafactive, chill, darkness, hyperx, intelliactive, interactive_pro and relaxed.

    #V5.0

    *Switched dyn_fsync to v2 from @Lord Boeffla
    *Removed custom hotplugs, state_notifier, Darkness/Impulse govs
    *Disabled wq_power_saving by default
    *Added back Zram
    *other misc changes under the bonnet. {:cough: hood :cough:}

    #V4.5

    ** No more SuperSu included, you NEED to flash SuperSU or MAGISK after flashing kernel (if you want root). - also wipe cache and art....

    *Updated UBERTC v6.x to latest, found here [TOOLCHAIN]UBER Toolchains thanks to @DespairFactor.
    *Added USB fastcharge by/thanks @tbalden
    *Gentle Fair Sleep Switch, thanks to @neobuddy89
    *init.d support, thanks @archeart
    *Many other misc changes (check source), all thanks to @franciscofranco, @eng.stk, @Tkkg1994 and everyone else!

    #V4.0

    A lot of changes...... - Uber toolchain v6 with graphite flags, sound control change, added govs, cleaned up some stuff, fixed other stuff that was messed up in v3, added more TCP, lowered the module count from 19-20 down to 11...... and other stuff that's been forgotten ha.

    Download:


    - Asgard Kernel V5.7 - 20A
    - Asgard Kernel V5.7 - 20B
    - Asgard Kernel V5.7 - 20C
    - Asgard Kernel V5.7 - 20D
    - SuperSU 2.79
    - MAGISK V12

    Installazione:

    0) Fate un backup dei dati importanti, non si sa mai. Inoltre fate molta attenzione ai requisiti prima di cominciare! Questo kernel NON ha i permessi root!
    1) Scaricate il kernel e SuperSU o Magisk e spostateli nel telefono.
    2) Riavviate il telefono in recovery.
    3) Effettuate quindi i seguenti wipe: cache e dalvik
    4) Installate il kernel e successivamente SuperSU o Magisk (se volete i permessi root).
    5) Riavviate.

    Crediti: Un grazie allo sviluppatore lordodin912 per avermi concesso il permesso di postare il suo Kernel!
    Thread XDA: [May-17-2017] Asgard Kernel_v5.4 - [STABLE][2016.12.15] SuperSU v2.79 - [2017.4.26] Magisk v12.0 - Root & Universal Systemless Interface [Android 5.0+]
     
    Ultima modifica: 20 Mag 2017
  2. Killua96

    Killua96 Super Moderator Membro dello Staff

    Iscritto:
    16 Nov 2013
    Messaggi:
    10.662
    "Mi Piace":
    3.543
    Disponibile la V5.5, changelog e download in OP.
     
  3. Killua96

    Killua96 Super Moderator Membro dello Staff

    Iscritto:
    16 Nov 2013
    Messaggi:
    10.662
    "Mi Piace":
    3.543
    Disponibile la V5.6, changelog e download in OP.
     
  4. Killua96

    Killua96 Super Moderator Membro dello Staff

    Iscritto:
    16 Nov 2013
    Messaggi:
    10.662
    "Mi Piace":
    3.543
    Disponibile la V5.7, changelog e download in OP.